3D render of a black leather cinema recliner cut open to show the wooden frame and mechanism inside

Furniture 3D modeling and rendering

Furniture 3D modeling and rendering for furniture brands

Q: How much does 3D furniture rendering cost?

Work is billed at 20 USD per hour. A simple model, a stool or a side table, starts at about 40 USD, a typical piece comes to around 160, and a sectional sofa or a fitted wardrobe with drawers, doors and hardware sits above that because of the part count. Send the drawings and the shot list and the estimate comes back in one business day.

Q: How long does a furniture 3D modeling project take?

Three to five days for one piece rendered on white and in context. Geometry comes first and goes to you for approval before any materials are applied, so corrections happen while they are still cheap. Several pieces of a collection can run at the same time.

Q: What is the difference between 3D modeling and rendering?

Modeling builds the piece itself, the frame, the panels and the joints, at the dimensions in your drawings. Rendering is the picture taken of that model, with materials, lighting and a background. You pay for the model once, and every image after that comes out of the same file.

Q: Can you work from drawings before the piece is produced?

Yes, and for most manufacturers that is the reason to go 3D at all. CAD or drawings with dimensions are enough to build an accurate model, so the catalogue, the line sheet and the shop can be ready while the first batch is still in production. Photos of a prototype help only for matching materials.

Q: Can we get the same piece in every fabric and finish?

Yes, and this is where 3D pays for itself in furniture. The model is built once, then upholstery, wood and metal change on it in an afternoon. The same model also exports as a 360 spin for the product page and as GLB and USDZ for augmented reality, so a customer can place the piece in their own room.

Catalogue images before the first piece is upholstered. We build the chair, the sofa or the cabinet in 3D from your drawings, then render silo shots for the shop, room scenes, cutaways that show the frame inside, every fabric and finish, and AR models a customer can stand in their own room.

Get a quote in 1 business day

No sample to shipdrawings or CAD are enough

3 to 5 daysone piece on white and in context

From $40a simple model, about $160 for a typical piece

$20 per hourfor anything beyond the package

What a furniture 3D modeling project gives you

Every furniture project grows out of one asset, the 3D model of the piece itself.

The 3D model

Frame, cushions, joinery, hardware and stitching, built to the dimensions in your drawings.

Silo images

Clean shots on white for the shop, the marketplace and the catalogue, from any angle you name.

Detail and macro shots

The weave of the upholstery, the grain of the veneer, the stitch on the arm. The shots that answer the quality question.

Room scenes

The piece in a living room, an office or a showroom, with no set to build and no location to rent.

Every fabric and finish

One model carries the whole range. A new upholstery or a new veneer takes an afternoon, not another shoot.

AR ready files

GLB and USDZ, so a customer can put the sofa in their own room and check it against the wall before buying.

Why furniture brands choose 3D rendering over a photoshoot

A photoshoot

Waits for a finished piece to be built and shipped
Studio, stylist and a set for every collection
Each fabric and finish is another set of shots
Bulky pieces cost more to move than to photograph

A 3D model

Starts from the drawings, before the first prototype
The room is built once and reused for the next collection
Fabrics, woods and metals swap on the same model
Nothing is crated, shipped or put back in the warehouse

Furniture is heavy and slow to move. Crating a sofa, sending it to a studio and getting it back often costs more than the images, and that is before anyone books the photographer.

Furniture 3D modeling and rendering projects we have done

Every piece below was modelled from drawings and material references, then lit into the scene it needed.

3D render of a knitted lounge chair on a slim steel frame against white

Knitted lounge chairA chunky knit over a shell, on a bent steel frame. Every loop catches light on its own, which is the kind of surface a photograph of a prototype rarely gets right and a flat texture never does.

3D render of a buttoned tan leather chesterfield sofa on white

Chesterfield sofaButtoned hide with the creases and the sheen leather gets with use, rendered on white for the catalogue and the shop.

3D render of a side table shown in five different colours and finishes

Side table in five finishesOne model, the whole colour range. A new finish drops onto the same table in an afternoon instead of another shoot.

3D render of an oak and white bed with two nightstands in a concrete room

Bed and nightstandsOak, lacquer and textile in one frame, with the room built around the set rather than rented for a day.

3D render of a white and oak dressing table with a mirror and a stool

Dressing tableThin panels, a mirror and everything the mirror throws back. The reflections are the hard part of a piece like this.

A phone screen showing a 3D lamp placed on a real table through augmented reality

The same piece in ARExported to GLB and USDZ, so a shopper can stand the piece in their own room and see how it sits against the wall.

3D render of a black lounge chair in front of a fireplace in a modern living room

Armchair in a room sceneThe chair is the product, the apartment around it is built in 3D, so the collection never waits for a location.

The details that make a furniture render look real

Furniture is judged at arm’s length, and every material in the piece is one the buyer has already touched.

Wood grain. Real veneer runs along the panel and matches at the joint. A texture that visibly repeats across a door is the first thing a cabinet maker notices.

Weave and welting. Boucle, linen and velvet catch light in completely different ways, and the piping along the seam is what tells the eye which one it is.

Leather and buttoning. Grain, creases at the flex points and the pull of the fabric at every button. Leather with no wear in it reads as plastic.

Joints and gaps. The shadow line where a drawer meets the frame is where a render either convinces or falls apart, and buyers read it without knowing they do.

Contact shadow and scale. A sofa that does not sit into the floor floats. The shadow under the leg is what puts the weight back into the image.

Material photos matter more here than anything else in the brief. Front and three quarter views, soft daylight, no shadows across the sample and nothing lying on top of it.

How a 3D furniture rendering and modeling project runs

Brief

You send drawings or CAD, the finish references and the shot list. We come back with a quote and a schedule.

Grey model

Geometry only, no materials yet. You approve proportions, joints and the way parts meet before anything is rendered.

Materials

Fabrics, woods and metals on one test frame, so the look is agreed before the full set is produced.

Renders

The complete set arrives in the resolutions and formats you asked for, ready for shop and for print.

Revisions

Two rounds of changes come with the project, not as an extra line at the end of the invoice.

The brief for a furniture 3D modeling project

The material references decide more than anything else on this list.

Drawings or CAD with dimensions. Sketches with measurements work too, and a ready 3D model in any format skips the modelling stage altogether.
Material photos, one per material. Front and three quarter views, soft daylight, no direct sun, no shadow across the sample and nothing lying on top of it.
The upholstery and finish list, with the codes you use in the catalogue, so the renders come back named the way your shop is.
The shot list: silo angles, detail shots, room scene, 360 spin, AR. It decides the quote more than anything else.

3D render of a plum velvet armchair shown from the front and from the back against white

Furniture 3D modeling price and timing

Everything is billed at 20 USD per hour, so the quote follows the part count and nothing else. A simple model starts at about 40 USD, a typical piece comes to around 160, and a sectional sofa or a fitted wardrobe with drawers and hardware sits above that. One piece takes 3 to 5 days to model and render on white and in context, and two rounds of revisions are included.

See the full price list

Furniture 3D modeling FAQ

How much does 3D furniture rendering cost?

How long does a furniture 3D modeling project take?

What is the difference between 3D modeling and rendering?

Can you work from drawings before the piece is produced?

Can we get the same piece in every fabric and finish?

Have a Question?

We will be more than glad to help. Just send us your project details and we will consult you on the best solution to choose or provide a lightning-fast estimation.

sales@ufo3d.com +1 415 426 7110